High molecular weight polyethylene oxide (PEO) is a widely used polymer compound with good water solubility, low toxicity, and easy processing and molding. It can be used as a water-soluble film, textile sizing agent, thickener, flocculant, lubricant, dispersant, aqueous drag reducer, cosmetic additive, antistatic agent, etc. The synthesis of polyethylene oxide generally adopts a batch reaction, and the key lies in the catalyst. Since the 1960s, a variety of catalysts have been studied and established. The more successful systems include: organozinc-polyol-monool, alkoxyaluminum-water-acetylacetone, alkylaluminum-water-acetylacetone, alkylaluminum-water-acetylacetone zinc, rare earth compound-alkylaluminum-water, etc.
1 Synthesis of Polyethylene Oxide
The polymerization reaction of ethylene oxide on a heterogeneous catalyst is a coordination anionic polymerization reaction, and there are different opinions on its mechanism [3]. Markova studied the reaction of ethylene oxide on oxide and hydroxide surfaces using infrared spectroscopy, suggesting a four-step polymerization process: (1) ethylene oxide monomers adsorb onto the catalyst surface (physical adsorption); (2) ring-opening occurs by breaking carbon-oxygen bonds; (3) a polymer is gradually formed and adsorbed onto the catalyst surface (chemisorption); and (4) the polymer chain grows.
Koher, Osgan, and others considered the polymerization process to be a three-step process (see Figure 1):
(1) Monomer and catalyst form ligands (Ⅰ→←Ⅱ);
(2) The coordinated monomers rotate and undergo charge shift (Ⅱ→Ⅲ);
(3) Increased electron weight leads to chain growth (Ⅲ→Ⅳ).
Many catalyst systems have been reported, but few have industrial value. The following sections introduce some of the more common catalyst systems. 1.1 Organozinc-Polyol-Monool System
Japanese researchers [4] studied this system around 1970. They found that the product obtained by reacting organozinc compounds with polyols, polythiols, polyphenols, polythiophenols, and other polyfunctional compounds containing -OH or -SH groups, or mixtures thereof, and then reacting them with monools, or the product obtained by reacting organozinc compounds with monools and then reacting them with the above-mentioned polyfunctional compounds, or mixtures thereof, as a catalyst for the polymerization of epoxides such as ethylene oxide alone or the copolymerization of two or more epoxides, has good catalytic activity. For the polymerization of ethylene oxide, the amount of catalyst is generally 0.05% to 1% of the monomer weight, and the polymerization reaction temperature is 5 to 100℃. After a reaction time of >10 hours, the conversion rate can reach over 95%, and the specific viscosity (ηsp/C, where ηsp is the specific viscosity and C is the solution concentration, measured as a 0.1% aqueous solution at 30℃) reaches 2.26 m³/kg.
The organozinc compounds in this system are generally: dimethyl zinc, diethyl zinc, di-n-propyl zinc, ethylethoxy zinc, etc.; polyfunctional compounds containing -OH or -SH groups are generally: ethylene glycol, diethylene glycol, propylene glycol, 1,4-butanediol, monothioglycol, ethylenedithiol, resorcinol, etc., and the monohydric alcohol needs to have fewer than 60 carbon atoms.
Experiments also show that the activity of the above catalyst system is much better than that of the products obtained by reacting organozinc with polyhydric alcohols, water, or monohydric alcohols alone as epoxide polymerization catalysts.
2 Applications of Polyethylene Oxide
Polyethylene oxide is a white powder. It has no special odor. Biological tests show that it has low toxicity. PEO is completely soluble in water and soluble in some organic solvents. It has softness and thermoplasticity. The softening point is 65-67℃. The embrittlement point is -50℃. When heated to a temperature higher than its softening point, it can be processed into various shapes and films. It has high resistance to bacterial erosion, will not rot, and has low hygroscopicity in the atmosphere. High molecular weight PEO also has a flocculation effect. It has good miscibility with other resins [1]. The relationship between the intrinsic viscosity [η] and molecular weight of polyethylene oxide solution conforms to Mark-Houwink. Relationship: [η] = KM2
Where K and a are constants in a given medium.
PEO has good chemical stability, being resistant to both acids and alkalis. Because its molecular structure lacks chemically active groups, it is difficult to undergo other chemical reactions except for decomposition under harsh conditions. However, due to the shared electron pairs on the ether oxygen atoms in the polymer chain, it has a strong tendency to form hydrogen bonds, and can form associated complexes with various low-molecular-weight organic compounds, organic polymers, and certain inorganic electrolytes. Whether it is solid PEO or an aqueous solution of PEO, the molecular weight decreases with prolonged storage time. This is mainly due to oxidative degradation. The presence of trace amounts of chlorine, peroxides, permanganates, persulfates, or transition metal ions (Gu⁻, Cu²⁺, Cu⁻, Fe¹⁺, and ¹²⁺) can all accelerate oxidative degradation. Stabilizers, such as butylated hydroxytoluene, 5%–10% (w) anhydrous isopropanol, ethanol, and ethylene glycol, are typically added to effectively reduce oxidative degradation.
2.2 Pulp Filler Retention Agents and Water-Soluble Paper Adhesives
In wood pulp papermaking, fillers are often added to make the paper white and non-reflective. However, a considerable proportion of fillers and fine fibers are lost during papermaking. If 0.5% filler is added per ton of dry fiber... High molecular weight polyethylene oxide (PEO) of 0.25–0.05 kg can significantly reduce the loss of fillers and fine fibers. PEO resin also shows a synergistic effect on commonly used flocculants, improving not only the retention rate of fillers, pigments, and fibers, but also increasing the drying rate.
PEO has excellent water solubility. Its aqueous solution has high viscosity, which disappears after drying, making it suitable for formulating water-soluble adhesives. In the paper industry, PEO is used as an adhesive during paper winding, allowing the paper roll to be opened without tearing the paper. The molecular weight of the PEO used should ideally be between 300,000 and 600,000, with a reasonably wide molecular weight distribution.
2.4 Thickener
High molecular weight polyethylene oxide (PEO) has a strong thickening ability; it can thicken solutions at very low concentrations and is resistant to acids and alkalis. Adding a small amount of high molecular weight PEO to detergent solutions can significantly increase the viscosity of the cleaning agent and control its flowability to suit various applications. For example, when cleaning vertical surfaces, a thicker cleaning agent can increase the contact time between the cleaning agent and the surface being cleaned, thereby improving the cleaning effect. Adding a small amount of high molecular weight PEO to hydrochloric acid and sulfuric acid solutions can thicken these solutions, making them easier to transport and use






